Wooden Gates

 

Home
Cattle Crushes 1
Squeeze Crush
Weighing Systems
Cattle Handling
Cattle Handling
Portable Cattle Feeding
Cattle Feeding
Self Locking Yokes
Cow Cubicles
Dairy Wash Troughs
Calf Equipment
Sheep Equipment
Sheep Feeding
Sheep Handling
Sheep Dips
Bull Equipment
Foot Baths
Gates Galvanised
Galebreaker
Silage Sheets
Vacuum Film
Silaflex
Wooden Gates
Gate Furniture
Cattle Grids
Water
Philmac Water Fittings
Water Troughs
Galv Water Trough
Storage Tanks
Dog Run / Penning
Contract Fencing
Electric Fencing
Feed Troughs /Plastic
Equestrian
PERMAPOST FENCING
Steel Fencing
Raised Beds
Barley Beef Feeder
Muck Boot
Coal & Logs
Contact Details
About Us
What Our Customers Say
Photo Gallery
News
Terms & Conditions
Storage Boxes
Twig Wreaths

Euroyokes:
Introducing the latest innovations in yoke technology, incorporating a host of improved safety features. Yoke widths can be altered, and the quick release facility allows any down cow to speedily released. The use of nylon rollers in the locking mechanism help to keep noise levels to a minimum.

Features of Self Locking Yokes.

  • Safety mode: all cows can go in and out freely.

  • One or more cows can be released using latch.

  • One or more cows can be retained by pegging (pegs not supplied).

  • Quick release any down cow from lower position

  • Fully adjustable feed space.

  • Yoke bar automatically returns to open position.

  • Nylon drop in catch to minimise noise.

  • Yoke guard minimise collar.
     

Type Of Panel O/All Length Type Of Post Post CRS
1 Yoke 630mm 90 x 90 SHS 770mm
2 Yoke 1265mm 90 x 90 SHS 1405mm
3 Yoke 1866mm 90 x 90 SHS 2005mm
4 Yoke 2504mm 90 x 90 SHS 2645mm
5 Yoke 3142mm 90 x 90 SHS 3280mm
6 Yoke 3780mm 100 x 100 SHS 3920mm
7 Yoke 4420mm 100 x 100 SHS 4560mm
The above post centres are nominal; by using adjustable end brackets and standard slotted connectors they can be reduced by up to 20mm or increased by up to 30mm.

E.g
7 yoke panel on 100 x 100 SHS posts can be set at 4572mm CRS to match building columns.
To allow Euro Yokes to operate correctly we recommend 610mm from the base of the panel to cow standing floor level (scrape passage). Yokes installed lower than this may fail to engage in locked position. Bases can be either, concrete wall or drop in timber.

These heights are based on the passage being regularly scraped, any bedding build up may affect the yoke operation.
 
Selloc pin each side of plate allows operating rods to rotate freely, while also locating the rod into position.
 

Panels c/w adjustable flat brackets to hang off posts or c/w adjustable angle brackets to hang off building columns.

Each panel has an integral operating rod of corresponding length so panels can either operate independently or use connectors to form a run.

Internal connector fitted with selloc pins. Handle fitted onto operating rod with grub screw.
Operating handle can be fitted to either end of panel. A maximum of 35 yokes can be operated in one run.
Rotate handle thro 180° & allow to drop thro, so it is always on feed passage side away from cows.
 
7 space euro yoke panels against column at 4572mm CRS.

7 space euro yoke panel between columns at 4572mm CRS. Each panel to be operated individually.

Fit handle onto operating rod before fitting panel between columns.

Minimum size column for handle to operate is 178 x 102 (7" x 4")

9 yokes in 6000 / 6096 bays - between or against columns.

 

1 (no) 4 space panel c/w adj flat brackets.
1 (no) 5 space panel c/w adj angle brackets.
1 (no) 100 x 100 post
1 (no) connector c/w selloc pins.
1 no) handle.