| |
|
 |
7 Rail Big Bar Gate, Box
Section Hanging, Vertically braced, available in
sizes from 3ft up to 16ft. |
| |
|
 |
7 rail, Channel end hanging,
vertically braced, available in sizes 10ft, 12ft
& 15ft. |
| |
|
|
 |
5 Rail Half Meshed Galvanised Gate.
A quality field gate ideally
suited for containing small animals and young
stock. It has a sleeved box section hanging
stile, 44.5mm o.d top and bottom rails, 30mm o.d
intermediates and clad with 75 x 75mm weldmesh.
1143mm high. |
| |
|
|
 |
Fully Meshed Deer Gate
The 1860mm high Deer Gates are
offered in three designs. 10 railed, 7 railed
part meshed or fully meshed and are supplied
with a pad lockable sliding bolt as standard. |
| |
|
 |
5 Bar Cattle Yard gate.
A strong gate suitable for use in open cattle
yards. It is supplied as standard
keyhole/pendulum sliding bolt and sleeved 50 x
50 hanging stile. Top and bottom rails are
48.3mm o.d whilst the intermediates are 44.5mm
o.d. 1143mm high.
Available in sizes from 3ft to 16ft.
|
| |
|
|
 |
Fully Meshed Lagoon
A 3 railed gate clad with 50 x 50
weldmesh and complete with extensions for barbed
wire. The hanging stile is 50 x 50 box section
with the remainder of the gate manufactured from
40 x 40 box section. It is 1270mm high and
supplied with a lockable sliding bolt. |
| |
|
| |
|
| |
|
 |
4 Rail Fully Meshed Galvanised Gate.
A medium specification fully
meshed gate fitted keyhole / pendulum sliding
bolt. A box section hanging and slam stile are
complimented with all the rails being 44.5mm o.d
tube and clad with 75 x 75mm mesh. 1143mm high.
|
| |
|
|
 |
Moorland Sheeted Door.
A medium weight (any hand) 3
railed sheeted gate, fitted with keyhole /
pendulum type sliding bolt, 1270mm high with a
50 x 50 sleeved box section hanging stile and
the remainder 40 x 40 box section, clad to one
face with pre-galvanised sheet. |
| |
|
