Sheep Hurdles

  7 Rail interlocking Sheep Hurdles

Loop type coupling arrangement, 970mm high, sizes: 3ft, 4ft in stock, 5ft, 6ft in stock, and 8ft in stock long.  
Note: The intended use for interlocking sheep hurdles is to form large holding pens or small individual pens. If used for long single runs of lambing pens or back to back lambing pens some joints will need to be cable tied together.

    Part Meshed Lambing Hurdle

part-meshed-lambing-hurdle-1024x417

F052-2002-03-1024x1024

Can be used to form banks of single runs, or back to back runs of lambing pens due to top loose ring and fixed 60mm x 60mm bottom lug type coupling arrangement.Not compatible with standard 7 rail interlocking sheep hurdles

1050mm high with 5 horizontal rails and clad with 50mm x 50mm weldmesh up to height of 524mm from finished floor level. Available sizes: 4ft in stock and 6ft in stock

 

   Lamb Creep Hurdle 

lamb creep hurdle

Loop type arrangement to ensure compatibility with interlocking sheep hurdles, 1830mm long x 970mm high with 7 horizontal rails. Creep apertures built in to a 535mm approx long opening at one end. 

   Alpaca Hurdle c/w 8 Rails 

alpaca hurdles

Loop type coupling arrangement, 1296mm high. Available size 6ft and 8ft long

Heavy Duty Range of Sheep Hurdles and Components for Sheep Race
Fits together with coupling rods.

6 railed Sheep Hurdles 
c/w drilled lugs at each end

sheep rail hurdle

Sizes Available: 2ft 2", 4ft 1", 5ft, 8ft 2" and 10ft long. all Sizes in Stock.

4 Railed Sheeted sheep hurdles
c/w drilled lugs at each end

sheeted sheep hurdles

Sizes Available: 3ft, 4ft 1", 5ft, 5ft 8", 8ft 2" and 10ft long.
8ft 2" & 10ft in stock

6 Rail Sheep Sliding Gate Hurdles 
c/w Drilled lugs at each end

6 Rail Sheep Sliding Hate Hurdles c/w Drilled lugs at each end

1000mm High, Opening of slide section is 1205mm wide,Opening section has no top rail to navigate under. Sizes available: 8ft 2" in stock, 9ft 3" and 10ft in stock long

6 Rail Sheep Hurdles Gate Built into one end

6 Rail Sheep Hurdles Gate Built into one end

1000mm high, Opening of gate section is 835mm wide. Gate has a top operated spring loaded slide bolt, Size available: 8ft 2" long in stock.

Pair of 6 Rail Sheep Gates in Frame 

Pair of 6 Rail Sheep Gates in Frame

1000mm high, Gates are joined in the middle with a drop over frame. Size available: 8ft 2" long in stock

Radiused Hurdle

Radiused Hurdle

1000mm high. Sizes available: 6ft 6" railed in stock, 6ft 6" sheeted, 3ft 7" sheeted, 5ft 6" sheeted and 6ft 1" sheeted long.

Sheep Swing Gates Built into A Frame
c/w drilled lugs at each end.

Sheep Swing Gates Built into A Frame

1000mm High. Gate has a top operated spring loaded slide bolt
Sizes available: 2ft, 3ft, 4ft 1", 5ft long all sizes in stock and also available 5ft sheeted long.

Fully Sheeted Sheep Shedding Hurdles
c/w drilled lugs at each end.

Fully Sheeted Sheep Shedding Hurdles

1000mm High. Gate has a top operated lever to divert animals into a adjacent pen. Gate section can be hinged from either end to make units handed. Note: gate on 8ft 2" is central hinged. Sizes available: 5ft and 8ft 2" long

Non Return Gate in Race Joining Frame

Non Return Gate in Race Joining Frame

Base is drilled so that adjoining race hurdles can be tapered if required when working with lambs, in stock.

Clip on Non Return Gate

Clip on Non Return Gate

Items attach onto sheeted race hurdles, in stock.

Race Joining Frame

Race Joining Frame

Base is drilled so that adjoining race hurdles can be tapered if required when working with lambs, in stock.

Drop gate in Race Joining Frame

Drop gate in Race Joining Frame

Base is drilled so that adjoining race hurdles can be tapered if required when working with lambs, in stock.

Fully sheeted "Slipway" Sheep Hurdles

Fully Sheeted Slipway Hurdles

Used when animals are to be put into a dipping bath. (dipping bath not included). Lift out section has inverted hooks at each end, hurdle can be replaced by a curtain (extra cost). Open section is 1500mm approx wide in both available options. Options available: 5ft with removable panel, 10ft with removable panel.

Swing And Slide Gate

swing and slide gate

Tried and tested unique gate with a curved top rail at each end to allow the gate to travel through a pivot wheel and behind the next batch of animals. Enables sheep to be both sides of the gate without obstruction which in turn means full pens all of the time, a slide bolt is built into the gate at each end. Options: 8ft 3" gate only in stock, 5ft 6" gate in frame, 76mm Hanging post to suit swing and slide gate c/w pivot.

1000mm High Fully Meshed
 Drafting / Stop gate

fully meshed drafter

Used to divert animals from race into two pens. The longer operating handle means that the operator can be out of the animals sight which encourages the sheep to keep moving forward. A drop over latch will lock gate in the "stop" position. Base is drilled so that adjoining race hurdles can be tapered if required when working on lambs. Size: 570mm wide x 980mm long in stock.

1000mm High Three Way 
Drafting / Stop Gate

1000mm High Three Way Drafting Stop Gate

Facility to allow stock to travel straight through the race or to be diverted to the right or left. Meshed stop gate is hinged and connected to one diverter gate. Floor plates at both ends allow for the race to be tapered if required. Size: 570mm wide x 980mm long

Standard Guillotine Gate
 

Sheep Swing Gates Built into A Frame

Available in three standard widths, bases are drilled so that adjoining race hurdles can be tapered if require when working on lambs. Pulley and nylon rope is included. Sizes available: 570mm, 915mm, and 1250mm wide. In Stock.

Lift & Swing Guillotine Gate c/w pivot to suit swing & slide gate

lift and swing guillotine gate

Main frame is full height both sides but includes pivot and fittings to accommodate swing and slide gate only if required. Bases are drilled so that adjoining race hurdles can be tapered if required when working on lambs, pulley and nylon rope is included. Size: 570mm wide In Stock.

Lift & Swing Guillotine Gate

lift and swing guillotine gate

Used to allow man access through gate if required but enables the gate to be lifted when moving sheep. Bases are drilled so that adjoining race hurdles can be tapered if required when working on lambs. Unit has full height vertical guide tube on one side (allows gate to swing & lift) & guide plates opposite (up to 1000mm high) Size available: 570mm wide. In Stock.

Sheep Non return / Stop Gate In Frame

sheep non return stop gate in frame

Base is drilled so that adjoining race hurdles can be tapered if required when working with lambs. Gate can be locked open, locked closed (stop gate) and used as a traditional non return gate.Size 570mm wide x 270mm deep. In Stock.

Sheep Self Locking Yoke Gate In Race Frame

in frame self locking gate

Base is drilled so that adjoining race hurdles can be tapered if required when working on lambs. Yoke has 5 settings varying in width between 50mm and 130mm. Yoke gates can be locked open when not in use. In Stock.

Sheep Dual Gates in Race Frame

sheep dual gates in frame

Base is drilled so that adjoining race hurdles can be tapered if required when working on lambs. Quick acting stop gates concertina out of the way. In Stock.

6 Rail Gate in Race Joining Frame

6 rail gate in race frame

Base drilled so that adjoining race hurdles can be tapered if required when working with lambs. Size: 570mm wide In Stock.

Sheep Sliding / Stop Gate In Race Frame

Sheep Sliding / Stop Gate In Race Frame

Base is drilled so that adjoining race hurdles can be tapered if required when working with lambs. Meshed gate slides positively in and out of position using a scissor action. Size: 570mm wide. In Stock.

Give us a call on
01239 891618 / 01239 891376
For Our Selling Price!