Calf Equipment

We stock a variety of calf equipment from calf troughs, to calf de-horning equipment, and calf penning, you name it we’ve most likely got it in stock.

calf creep feeder calf creep feeder calf creep feeder calf creep feeder calf creep feeder calf creep feeder

IAE Classic Calf Creep Feeder

IAE Classic Calf Creep Feeder

Stock item, on your yard in a matter of days!

The IAE Classic calf creep feeder brings together the best elements of the previous calf creep feeder designs, and enhances the product with new features and design alterations.
The hopper, intricately folded from heavy gauge sheet, using state of the art folding and punching equipment, forms an integral part of the structure of the creep.
Incorporating the hopper into the unit as a whole gives creep inherent rigidity and strength.
To prove the durability and load capacity of the new creep feeder, it was tested with a payload in excess of 500kg in the 725 litre hopper. Coping with ease and without sustaining any damage throughout the trial, which included transit and lifting using the (optional) top lifting frame, and the built in 3 point linkage and fork lift points.

  • Built-in 3 point linkage and pallet fork lifting points make life easy when moving short distances around the farm.
  • Optional bolt on the top lifting frame also available.
  • The lift up hopper lid also slides forward on nylon rollers to allow even greater access.
  • The front apertures offer plenty of adjustment, 3 height settings and 2 width settings.
  • The cross-bar (height restrictor) sits in a special pair of brackets with three locations and is secured with an “R-clip” and peg.
  • Each vertical aperture bar is located in special cut out positions inside the front of the frame and these are also secured with an “R-clip” and peg.
  • Straightforward to open and alter, the clip and peg system is inaccessible to cattle.
  • Dimensions – 2500mm wide, 1857mm deep (front to back), 1355mm high (front)
  • Bird Flaps optional extra.

IAE Standard Calf Penning

IAE Standard Calf Penning

  • 1015mm (3ft 4″) High
  • 25mm x 25mm SHS horizontal rails and end vertical stiles
  • Welded slotted lugs at each end to suit 10mm o/d coupling rod arrangement (rods extra)
  • Supplied with plastic caps to top end of vertical stiles.

In Stock, on your yard in a matter of days!

Standard Calf Pen Fronts

IAE Standard Calf Pen Fronts

  • 2 x head spaces complete with 2 x bucket holders
  • 915mm (3ft) wide

In Stock, on your yard in a matter of days!

Standard Yoke Type Calf Pen Fronts

IAE Standard Yoke Type Calf Pen Fronts

  • Option 915mm (3ft) long x 1015mm (3ft 4″) high single manually operated yoke.
  • Option 1220mm (4ft) long x 1015mm (3ft 4″) high with two manually operated yokes
  • Both 915mm and 1220mm options supplied complete with 2 x bucket holders.

In stock, on you yard in a matter of days!

IAE Part Sheeted Side Panels

IAE Part Sheeted Side Panels

  • Easy to clean galvanised sheet
  • Calves can see animals in adjacent pens through the gaps at the top of the hurdle (meets welfare standards for tactile contact).

Sizes:

  • 1525mm (5ft) part clad with galvanised sheet
  • 1830mm (6ft) part clad with galvanised sheet

In Stock, on your yard in a matter of days!

IAE Standard Railed Side Panels

IAE Standard Railed Side Panels

  • 6 horizontal rails

Sizes:

  • 1525mm (5ft) 6 rail
  • 1830mm (6ft) 6 rail

In stock, on your yard in a matter of days!

IAE Fully Sheeted Back Panel

IAE Fully Sheeted Back Panel

  • Easy to clean galvanised sheet

Sizes:

  • 915mm (3ft) fully sheeted
  • 1220mm (4ft) fully sheeted

In Stock, on your yard in a matter of days!

IAE 6 railed Back Panels

IAE 6 Railed Back Panels

Size:

  • 915mm (3ft) 6 rail
  • 1220mm (4ft) 6 rail

In Stock, on your yard in a matter of days!

Optional Extras

Double Sided Meshed Haybasket

  • 475mm long x 475mm wide x 490mm deep to slot over division panels.
  • Suitable for Calf Pens and Lambing pens.

In stock, on your yard in a matter of days!

Fittings to Standard Calf Pens

  • 10mm dia coupling bar
  • Short plate c/w 1 lug
  • Full length plate c/w 2 lugs

In Stock!

Yoke Type Calf Penning Fronts

915mm (3ft) long complete with 1 yoke and 2 bucket holders.

also available 1200mm (4ft) long complete with 2 yokes and 2 bucket holders.

Standard Railed Side Panels

6 horizontal rails
Sizes available: 1525mm (5ft) long & 1830mm (6ft) long.

Sheeted Back Panel

Easy to clean galvanised sheet.
Sizes available: 915mm (3ft) fully sheeted  & 1220mm (4ft) fully sheeted

Railed Back Panel Calf Pen

915mm (3ft) 6 rail
1220mm (4ft) 6 rail.

Simple Calf Penning Front Simple Calf Penning Front

IAE Simple Calf Pen Front Panels

Simple Calf Pen Front Panels

  • Welded loop lugs at each end to suit extended vertical stile arrangements.

Sizes available:

  • 1220mm (4ft) long with 2 openings and 2 bucket holders. In Stock
  • 1830mm (6ft) long with four head spaces and four bucket holders. In Stock

Simple Calf Penning Side & Back Panels

6 railed back / side panels to suit simple calf pen fronts.
1220mm (4ft) long & 1830mm (6ft) long.

Calf Pen Fittings

10mm dia coupling bar.
Short plate complete with 1 fixing lug.
Full length wall plate complete with 2 lugs.

Large Calf De-Horning Crate

IAE Large Calf De-Horning Crate

Stock item, on your yard in a matter of Days!

  • 1185mm long x 480mm wide x 1195mm high c/w wooden floor.
  • The hinged gates at the back of each side allow access all around the animals rear end.
  • Optional extra wheels and handle if required.
  • Calves walk in and exit through the front gate Yoke arm in fixed front gated section has adjustable ratchet catches.
  • Supplied with adjustable wooden head rest and rope restraint.
  • Supplied with belly strap and backing up bar.

Small Calf De-Horning Crate

IAE Small Calf De-Horning Crate

Stock item, on your yard in a matter of days!

  • 915mm long x 380mm wide x 1020mm high c/w wooden floor.
  • Optional wheels and handles if required.
  • Calves walk in and back out.
  • Yoke arm in fixed front section has adjustable ratchet catches.
  • Supplied with adjustable wooden head rest and rope restraint.
  • Supplied with belly strap and backing up bar

Standard Calf Hayrack

Double-sided mesh hayrack 475mm x 475mm x 490mm deep. Suitable for all calf pen types.

Hook Over Calf Trough

  • Hot dip galvanised
  • Hook brackets supplied loose, bolt on
  • 320mm wide x 195mm deep

Hook over Calf Trough Sizes:

  • 915mm long (1 brace)
  • 1370mm long (1 brace)
  • 1830mm long (2 braces)
  • 2745mm long (3 braces)

Wall Fitting Calf Trough

305mm wide x 150mm deep x 1.5mm thick
Ideal for use in calf creep pens.
Fixing bolts are not included.
Sizes available: 3ft, 4ft, 5ft, 6ft, 7ft & 8ft long.

Hook Over Calf Hayrack

Dimensions:

  • 400mm wide x 420mm deep x 240mm high back
  • 75mm x 75mm weldmesh

Sizes:

  • 610mm long
  • 915mm long
  • 1250mm long
  • 1830mm long

Wall Fitting Calf Hayrack

455mm wide x 610mm deep, 152mm x 76mm weldmesh
Fixing for use in calf creep pens.Also available as hook over type at extra cost.
Also available with 75mm x 75mm weldmesh at extra cost.
Available sizes: 3ft, 6ft abd 8ft long.

Hook over Calf Hayrack

400mm wide x 420mm deep with 240mm high back.
Weldmesh 75 x 75mm (3″ x 3″) and sheeted end panels.Hook brackets welded on.
Available sizes: 2ft / 3ft / 4ft / 6ft

Heavy Duty Calf Hayrack

  • Stanchion fitting type
  • Hot dip galvanised
  • Sheet metal back

Dimensions:

710mm wide x 915mm deep
152mm x 76mm weldmesh
Length – 4575mm stanchion centres (though other sizes can be made upon request)

Hook on Calf Trough Hook over Calf Trough

Hook on Calf Trough

284mm wide x 123mm deep. Hook brackets supplied loose for ease of storage, bolt on.
Available sizes: 3ft / 4ft 6″ / 6ft / 9ft

IAE Goliath Calf Trough

Stands at 466mm high x 446 mm wide.315mm wide x 200mm approx deep half round trough.
Fully welded for liquid feeding. Diagonal strut bracing below trough for added strength.
4ft long unit c/w 1 brace. 6ft long unit c./w 1 brace. 8ft long unit c/w 2 brace.

Free Standing Calf Trough

Stands at 585mm high, 430mm wide x 135mm deep trough. Fully welded trough ends suitable for liquid feeding. Comes with splayed legs as standard for stabibility.Option available to stand against wall with vertical legs (POA) 4ft long unit. 6ft long unit In Stock. 8ft long unit.

Calf Feeder Calf Feeder Calf Feeder Calf Feeder Calf Feeder

Calf Feeder

Designed for use within calf pens for the fattening of younger animals. To be hooked over pen gates or panels using integrated hooks.
1280mm long x 415mm wide x 750mm high. 240ltr capacity. 2 setting adjustable feed height. Adjustable flow control. Sturdy, riveted construction.

Can't find a product? Got a Question?

We provide a dedicated service, we answer when you call and give you the information you need, no answer phone options, straight to someone who can deal with your enquiry promptly. We are also competitively priced and are ready and waiting to take your calls 7 days a week.

01239 891618

© Copyright 2024 All rights reserved | Website Designed & Developed by United Studios