Portable Cattle Handling

For ultimate flexibility you cannot improve upon our range of portable cattle handling equipment, suitable for field usage can also be used in a yard but may require some permanent fixtures. Standard hurdles are 6 rail x 1525mm high, with solid bar vertical infillers between the rails for added strength, whilst gates in hurdles and frames can be hung either left or right. All items are quick and easy to assemble and because of its modular nature you can make the system as large or small as your needs or space will allow.

At Brian Llewelyn a’i Ferched we stock a huge range of cattle handling equipment, where you can see them set up, and have expert advice to hand also.

Saracen Yoke Gate in Frame

Saracen Yoke Gate in Frame Mobile Cattle Handling

  • Self Closing yoke design activated by the animal’s forward movement.
  • Release handles fitted to both sides.
  • If an animal shuts the yoke having not put its head through, reset handles allow yoke to be reset without needing to let the animal exit the crush.
  • Operator handle assits animal exit if required.
  • Fully sheeted baffle plates to eliminate leg trapping.
  • Adjustable width yoke with 7 settings between 100mm and 250mm.
  • Vertical yoke arms to reduce the risk of choking if the animal collapses.
  • Lugs and short coupling rods included to fix to portable cattle hurdles etc.
  • Compatible with Super Scoop.

External dimensions: Length 510mm, Base Length 400mm, Width 838mm, internal width 738mm, Height 2000mm, weight 135kgs.

Chieftain Yoke Gate in Frame

  • Manually operated scissor yoke with fully retractable yoke arms.
  • Lever operating handle lifts the yoke upwards after the animals head has gone past.
  • Fully opening front and side gates from the front cage enabling greater access around the head.
  • Vertical Yoke arms reduce the risk of choking if the animal collapses.
  • Simple quiet winding adjustment gives infinite yoke widths between 100mm and 290mm.
  • Fitted with adjustable anti jump bar to reduce the chance of animals lifting their legs over the individual yoke arms.
  • Lugs and short coupling rods included to fix to portable cattle hurdles etc.
  • compatible with Super Scoop.
  • In Stock

External dimensions: Length 840mm, Base length 700mm, Width 838mm, Internal width 738mm, Height 1900mm, Weight 202kgs.

Highland Yoke Gate in Frame

  • Manually operated scissors yoke with fully retractable yoke arms.
  • Lever operating handle lifts the yoke upwards after the animals head has gone past.
  • Simple quiet winding adjustment gives infinite yoke widths between 100mm and 290mm.
  • Two piece wrap around front gates open out in a single operation to allow full unobstructed access to the animals head.
  • Lugs and short coupling rods included to fix to portable cattle hurdles etc.
  • Not compatible with Superscoop.

External dimensions: Length 1250mm, Base length 840mm, width 1300mm, internal width 738mm, Height 1900mm, Weight 190kgs.

Cattle Hurdles 6 rail

IAE Cattle Hurdles

Standard 1525mm high 6 Rail Hurdles

  • Improved hurdle strength featuring 40mm x 20mm RHS bracing.
  • The position of the top drilled lugs prevent potential leg traps on all 6 rail units.

Sizes Available:

  • 2150mm long (7ft) In Stock
  • 2440mm long (8ft) In Stock
  • 3050mm long (10ft) In Stock

 

1525mm 6 Rail Mobile Cattle Hurdle

1525mm high 6 rail hurdles c/w 1050mm mobile cattle handling diverter gate built into the frame.

  • Diverts stock out of race.
  • Locks in divert position if required.
  • Available sizes 8ft and 10ft long,

1525mm high 6 mobile cattle handling rail hurdles c/w 650mm gate built into the frame.

  • Enables personnel access into / through race.
  • Locks off at 90 degrees across race width when used in conjunction with drop over bolt latch receiver.
  • Available sizes 8ft and 10ft long,

 

Race Joining Arches

Race Joining Arches In Stock

  • Used in mobile cattle handling systems where posts are not practical
  • Prevents hurdles from “splaying” when forming part of the race.
  • Standard frames come complete with drilled lugs each side to connect to hurdles.
  • Gate units have drop over bolt latches fitted.
  • Gate units are complete with two pairs of drilled lugs and one pair of hinge hooks.
  • Some fittings will be provided loose to bolt on.

Available sizes: 2ft 9″ wide and 5ft 2″ wide either as plain race arches or complete with a gate.

Non-Return Gate in race Arch

  • 787mm 0/a wide x 2253mm o/a high.
  • Comes complete with drilled lugs each side.
  • For use in the cattle race
  • Saloon bar type winged gates prevent cows from backing up.

Portable Cattle Handling Fittings

We have a range of fixtures and fittings to support your portable cattle handling needs:

  • Support Posts
  • Coupling Bars
  • Pair of Cattle Lugs on Full Length drilled Plate
  • Drop Over Bolt Latch Receiver – Clamps onto cattle hurdle horizontal rails. Latch of gate locates between rails.
  • Backing up bar assembly
  • Cattle lugs on Vertical drilled plates

Sliding Gate in Race Joining Arch

For use within race system, the sliding gate provides a part sheeted barrier to cattle and features a retractable lintel.

  • 840mm o/a wide x 2166mm o/a high
  • Acts as a non return gate and stops the next animal in the race
  • Slide door can slide from either direction due to the retractable sliding gear.
  • Flip over plate locks one or both sides of gate.
  • Comes complete with fixing lugs each side.
  • Handles and stops are fitted to both sides.

Sliding Gate System

IAE Sliding Gate System in Race Arch

Stock item, on your yard in a matter of days!

Designed for use directly behind a cattle crush, this system comprises a sliding gate to provide a positive barrier to oncoming cattle down the race, whilst the side gates allow full and easy access to rear of animal.

  • comes complete with two 1220mm long hinged gates.
  • Tie bars connect onto the top of IAE cattle crushes for stability.
  • Creates a safe inspection area to the rear of the crush.
  • Enables access for foot trimming.
  • Stops the next animal in the race.
  • Slide door can slide from either direction due to the retractable sliding gear.
  • Flip over plate locks one or both sides of gate.
  • May need some self assembly.
  • Comes complete with fixing lugs and hinge hooks.
  • NB: Cannot be used in conjunction with weigh platform, load bars or squeeze crushes.

Access Kiosk

IAE Access Kiosk

Stock item, on your yard in matter of days!

Designed for use in race system. Opposite hand gates can safely be used to allow for an animal to be stopped and to restrict backing up.

  • Dimensions 1040mm long x 1000mm wide x 1930mm high.
  • Designed to allow access to the rear of the crush within a race system.
  • Two gates come with drop over bolt latches fitted.
  • Creates a cross over passageway in the race or an inspection area to the rear of the crush.
  • Can accommodate a slide gate to the rear if required.
  • Comes complete with drilled lug assembly.
  • Bolt on lug assembly at one end and welded lug assembly at opposite end.
  • Supplied flat packed for self assembly.
  • Cannot be used when foot trimming if connected to the crush.

Can't find a product? Got a Question?

We provide a dedicated service, we answer when you call and give you the information you need, no answer phone options, straight to someone who can deal with your enquiry promptly. We are also competitively priced and are ready and waiting to take your calls 7 days a week.