Specialist Cattle Crush

The Specialist range of IAE Cattle Crushes are split in three.Dairy Master Crush, a cattle crush purely designed for foot trimming. The Highland Cattle Crush, designed for the Highland Cattle breed, and the Champion Beefmaster cattle crush, this crush is designed specifically for larger breeds and is an extremely heavy duty unit.

Keyword for Page: Specialist Cattle Crush

Dairymaster Cattle Crush Dairymaster Cattle Crush Dairymaster Cattle Crush

Dairymaster Cattle Crush

Dairymaster Cattle Crush

Yoke Description:

  • Rope operated yoke incorporated into the front exit gate and used from the rear.
  • Adjustable neck yoke with four settings from 145mm to 230mm.
  • Baffle plates eliminate potential leg traps.

Body Description:

  • Front side gates hinge from the front pillar.
  • Bolted construction timber floor.
  • Rear drop down floor extensions to help prevent the cow from rocking the crush with rear feet.
  • Two adjustable front foot blocks.
  • Geared winch to raise / lower feet.
  • Adjustable belly band.
  • Adjustable rump chain.

Optional Extra for Dairymaster Cattle Crush

  • 3 rail side gates c/w chains to close gap at rear open side section
  • Can be chained to race section
  • Pair of 1830mm long 3 rail gates.

Ring for availability.

Highland cattle crush Highland cattle crush Highland cattle crush Highland cattle crush

Highland Cattle Crush

Highland Cattle Crush

Designed specifically for the Highland cattle breed. The sides of this highland cattle crush unit are only 1100mm high which allows the horns to pass safely over the top.

  • Manually operated scissor yoke with fully retractable yoke arms.Lever operating handle lifts the yoke upwards after the animals head has gone past.
  • Simple quiet winding adjustment gives infinite yoke widths between 100mm and 290mm.
  • Two piece wrap around front gates open out in a single operation to allow full unobstructed access to the animals head.
  • Two short side doors on each side hinge from a middle pillar to allow access to the animal’s flanks.
  • Traditional backing up bar facility built into the side gates, rear gate included as standard.
  • Pallet fork lifting points welded onto the top horizontal rails.
  • One removable extension rail on each side sit above the side gates to allow full access to the animal’s flanks.
  • Fully welded slightly tapered tread plate floor to help keep the animals feet inside the crush when the side doors are open.
  • Length 2775mm : Base Length 2170mm : Width 1300mm : Internal Width 738mm : Height 1900mm

Champion Beef Master Cattle Crush

The Champion Beef Master Cattle Crush is designed specifically for larger breeds and is an extremely heavy duty unit.

  • Manual traditional lever operated yoke handle can be used on either side. Spring loaded quick release adjustment gives 4 preset yoke widths from 165mm to 330mm.
  • Fully opening front and side gates form the front cage enabling greater access all around the animals head.
  • Fully welded tread plate floor to help keep the animals feet inside the crush when the side doors are open.
  • Two full height side doors on each side, hinged from a middle pillar, allow full access with no obstructions to the animal’s flanks.
  • Rear gate included as standard.
  • Traditional backing up bar facility built into the side gates.
  • Pallet fork lifting points welded onto the top horizontal rails.
  • Length 3120mm : Base Length 3000mm : Width 1000mm : Internal Width 900mm : Height 1950mm

Can't find a product? Got a Question?

We provide a dedicated service, we answer when you call and give you the information you need, no answer phone options, straight to someone who can deal with your enquiry promptly. We are also competitively priced and are ready and waiting to take your calls 7 days a week.

01239 891618

© Copyright 2024 All rights reserved | Website Designed & Developed by United Studios