Lift & Swing Guillotine Gate Used to allow man access through gate if required but enables the gate to be lifted when moving sheep. Bases are drilled so that adjoining race…
Can be used to form banks of single runs or back to back runs of lambing pens due to top loose ring and fixed 60mm x 60mm bottom lug type…
We have a variety of sizes for the interlocking sheep hurdle: Loop type coupling arrangement, 970mm high. Available lengths 3ft, 4ft, 5ft, 6ft and 8ft Note: The intended use for…
IAE Lamb Creep Hurdle Loop type coupling arrangement to ensure compatibility with interlocking sheep hurdles. 6ft long x 970mm high with 7 horizontal rails. Creep apertures built in to a…
Sheep sliding / stop gate in race frame c/w drilled lugs at each end Base is drilled so that adjoining race hurdles can be tapered if required when working on…
Base drilled so that adjoining race hurdles can be tapered if required when working with lambs. Size: 570mm wide
The base of the Sheep Dual Gates in Race Frame is drilled so that adjoining race hurdles can be tapered if required when working on lambs. Quick acting stop gates concertina…
IAE Sheep Self Locking Yoke Gate in Race Frame c/w drilled lugs at each end. Base is drilled so that adjoining race hurdles can be tapered if required when working…
IAE Sheep non return / stop gate in frame c/w drilled lugs at each end. Base is drilled so that adjoining race hurdles can be tapered if required when working…
The standard guillotine gate is used to allow man access through gate if required but enables the gate to be lifted when moving sheep. Bases are drilled so that adjoining race…
The three way drafting gate is a facility to allow the stock to travel straight through the race or to be diverted to the right or left. Meshed stop gate is…
Fully Meshed Drafting Stop Gate Used to divert animals from race into two pens. The longer operating handle means that the operator can be out of the animals sight which encourages…
The swing and slide gate is a tried and tested unique gate with a curved top rail at each end to allow the gate to travel through a pivot wheel…
Used when animals are to be put into a dipping bath. (dipping bath not included). Lift out section has inverted hooks at each end Lift out hurdle can be replaced…
This Drop Gate In Race Joining Frame base is drilled so that adjoining race hurdles can be tapered if required when working with lambs.
The Race Joining Frame base is drilled so that adjoining race hurdles can be tapered if required when working with lambs.
Clip on Non return Gate In Stock This Clip on Non Return Gate attaches to sheeted race hurdles.
The Non Return Gate in Race Joining Frame base is drilled so that adjoining race hurdles can be tapered if required when working with lambs
This Fully Sheeted Sheep Shedding Hurdle is 1000mm High. Gate has a top operated lever to divert animals into an adjacent pen. Gate section can be hinged from either end to…
IAE Sheep swinging gate built into a frame c/w drilled lugs at each end 1000mm High. Gate has a top operated spring loaded slide bolt Sizes Available: 6 rail 660mm…
© Copyright 2024 All rights reserved | Website Designed & Developed by United Studios